Cable Opening Tools

K-LS2 Center Pipe Stripper

One hinged book of channels for the whole cable: nine sizes from 1.5 mm loose tubes to 11 mm center pipes, each channel holding its tube at the depth its wall needs. Open the book, lay the tube in its channel, close, and pull — ten super alloy blades score the wall lengthwise and the tube opens without a mark on the fibers.

Channels

9 — loose tubes 1.5–1.9 / 2.0–2.4 / 2.5–2.9 / 3.0–3.3 mm; center pipes Ø4.5 / 6 / 7 / 8 / 11 mm

Blades

10 super alloy blades

Blade setting

Factory pre-set, no adjustment

Body

Moulded plastic, hinged open (book) structure

Dimensions

70 × 66 × 29 mm

Send Inquiry WhatsApp UsK-LS2 Center Pipe Stripper Datasheet (PDF)

Key features

• Nine channels in one tool: the four loose-tube sizes (1.5–1.9 to 3.0–3.3 mm) and five center-pipe sizes (Ø4.5, 6, 7, 8 and 11 mm) — the same book opens the small tubes inside a cable and the big central tube the cable is built around
• Opens like a book: the full-length hinge lets the two halves fold flat, so a tube is laid into its channel along its whole length — no threading, and the tube can be seated mid-span for window access
• Ten super alloy blades in screwed seats along the channels: each channel carries its blade at the depth its wall needs, set at the factory — hard center-pipe walls and thin loose-tube walls are scored by their own channel, not by one compromise setting
• Every channel is stamped with its size inside the book, so the right channel is found by eye before the tube goes in
• Built for central loose tube (unitube) cables: the Ø4.5–11 mm channels take the center pipes of unitube and beam-tube constructions that pocket slitters cannot swallow
• Supplied neutral and unbranded as standard; private labeling is made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, so the goods arrive ready for your warehouse

Specifications

Documents

• K-LS2 Center Pipe Stripper Datasheet (PDF) (PDF)