Cleaning, Connectors & Crimping

K-RJ86 Pass-Through Modular Crimping Tool

Crimp, trim, cut and strip with one ratchet tool: 8P pass-through plugs are crimped and trimmed flush in a single squeeze, and the second cavity takes 6P telephone plugs.

Crimp cavities

Two — 8P and 6P

8P plugs

RJ45 pass-through (EZ) plugs, Cat5e / Cat6 / Cat6a; also standard non-pass-through RJ45 plugs

6P plugs

RJ12 and RJ11 (6P6C / 6P4C)

Trimming

Pass-through conductors are trimmed flush with the plug face in the same crimp stroke

Cutter

Built-in cable cutter, replaceable blade

Send Inquiry WhatsApp UsK-RJ86 Datasheet (PDF)

Key features

• Pass-through plugs end the guesswork: the conductors come out of the plug face, so the colour order is checked with the plug already on the cable — then one squeeze crimps all eight contacts and trims the ends flush, with nothing sticking out to snag or short
• Two cavities cover the whole job: 8P for RJ45 Ethernet (pass-through Cat5e / Cat6 / Cat6a, and standard non-pass-through plugs), 6P for RJ11 / RJ12 telephone plugs
• Full-cycle ratchet: the jaws do not open until the crimp is complete, so a half-crimped plug — the one that passes today and fails next month — cannot be taken out of the tool by accident; the release lever frees a plug when you do want it out
• Everything for a termination is on the tool: a cutter for the cable, a throat stripper that takes the round jacket off without nicking the pairs, and the crimp dies — no second tool comes out of the kit
• The T568A and T568B colour chart is printed on the frame where your eyes already are — no card to lose, no phone to unlock with gloves on
• Carbon-steel frame with blue non-slip grips, and a locking latch that keeps the tool closed and the blade covered in the kit pouch
• Private labeling made to your requirements — labels with your logo, part numbers and barcodes on the inner boxes and outer cartons, ready for your warehouse

Specifications

Documents

• K-RJ86 Datasheet (PDF) (PDF)